What is Tengu?
The Tengu is a legendary creature in Japanese folklore, and are considered to be a Shinto deity (Kami) or super natural being. Tengu are traditionally depicted as having a red face with a long nose, donning a traditional priest robe, tall geta clogs with one tooth in the center. They have wings on their backs and can soar freely in the skies, holding a leaf fan in their hands. It was said that they could control the wind.
Tozando's Tengu Koshirae Iaito Sword
This sword was inspired by the famous story of the young Ushiwakamaru (who eventually became the famous warrior, Minamoto no Yoshitsune).Legend has it that Ushiwakamaru was instructed in the art of the sword by a Tengu residing in the Kurama Mountains, named Sojo-bo.
The sword's Fuchigane features the great Dai Tengu, Atago Taro-bo, who was reputedly the strongest of all the Tengu. For the Menuki we have used a feather from the characteristic wings of the Tengu, and lastly a fan shaped Tsuba has been added to imbue the Iaito with the powers of the Tengu. The Tengu Koshirae are made individually in Kyoto, a place with a deep connection with the Tengu legends. The blade is made with aluminum/zink alloy. It also comes with a certificate emblazoned with the ďKyoto JapanĀEmark.
What's So Special About Suzaku Iaito
Tozandoís Suzaku series Iaito looks, feels, and weighs the same as a live blade (Shinken). A big feature of our Suzaku blades is that they are not made from the usual sand casting method used for producing most imitation swords. Instead, we adopted a special reinforced GT metal blade made through highly precise gravity casting.
Special Blade Exclusively for Iaido
Special reinforcement GT metal was especially developed for our blades. Not only are they balanced better than diecast blades, they are highly functional and the best quality available for Iaido. This GT metal has a superior tensile strength and elasticity compared to other alloys used for Iaito in the past. The specific gravity of GT metal is also rather light and isnít susceptible to stress corrosion, so it can be said that it is an alloy that is most suitable for making Iaito.
Adopting the Best Method
For casting the blade we chose to use the gravity casting method, this is because the sandcasting method used by other manufacturers in the past is actually quite unreliable. When sandcasting a blade you pour the molten metal into a cast made with hardened sand, not only does the result of the sandcasting vary slightly each time due to the sand loosing itís shape, but also as the metal takes longer to cool, it increases the chances of hidden cavities inside the blade, making it prone to producing defects.
Reason for Polishing by Hand
After the blade has been casted, each blade is meticulously hand-polished by our craftsmen. Considering the work efficiency, there might be more effective ways to rapidly polish each blade by machine, however, by polishing each blade by hand our craftsmen can bring out the most of the individual personalities and details of each blade and remove any defective products, leaving only the highest quality blades to be used for making Iaito.
No-nonsense Hi Carving
The Hi-groove that greatly affects the sound and feedback of the Iaito is also carved by hand. One of the big differences between a conventional Iaito blade and the Iaito blade for the Suzaku series is the shape of the hi-groove. Up until now all Iaito blades had a hi-groove that are tapered in both end of the groove to save time during the polishing process. However, no matter which reference book you look in you wonít find any authentic Japanese swords who has a groove with such a shape, so even though it takes more than twice the effort and time, we decided to use a more realistic Marudome Hi-groove with a Shinken Hi for our blade. Among all the available Iaito on the market today only the Suzaku series has this kind of Shinken Hi-groove by default, this might be why the Suzaku Iaito looks and feels like an authentic Japanese sword at first glance, a result of the effort put into making the blade by our craftsmen.
Proudly Made in Kyoto
In this way almost all parts of the Suzaku series Iaito are made in Kyoto, each and every part reflecting the spirit of craftsmanship that Kyoto is known for. As our craftsmen are also highly ranked Iaido practitioners, they do not only look at each sword as craftsmen, but also as Iaido practitioners, ensuring the highest quality by testing each sword before shipping them to the customer. This is why each sword has a serial number carved on the Nakago to ensure the quality of each batch of sword blades, infusing them with the soul and pride of the craftsmen. Even Mr. Kuwano Toshiro who is a well-known master Saya craftsman who have experiences with handling national treasure class swords, praised the Suzaku Iaito, saying that it was "very well done and praiseworthy".
The "Kyoto Japan" Mark is a mark endorsed by the Kyoto Industry Development Consortium and it's given to companies that protects and develops the traditional craftsmanship in Kyoto, domestically and overseas.
As the Suzuku series of Iaito are made in Kyoto, Tozando has been certified to use the "Kyoto Japan" mark with the Suzaku series of Iaito.